UPC: 7291063000141 | Kramer PT-572+

UPC lookup results for: 7291063000141 | Kramer PT-572+

The PT-572+ is a DGKat™ twisted pair receiver for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572+ converts the twisted pair signal back to an HDMI signal. Max. Data Rate – 4.95Gbps (1.65Gbps per graphic channel). HDTV Compatible. HDCP Compliant. DGKat™ Signal Integration – Kramer s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance. HDMI Support. 3D Pass-Through. System Range – Up to 90m (295ft) at 1080i or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable. Cable – Requires Shielded Twisted Pair (STP) cable. For optimum range and performance use use Kramer s BC-DGKat524 & BC-DGKat623 cables. Note that the transmission range depends on the signal resolution graphics card and display used. The distance using non-Kramer CAT 5 CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground. EDID PassThru – Passes EDID signals between the source and display. Status LED – Lights red when receiving power only orange when output and power are attached and yellow when both an active input and output are attached. Power Connect™ System – A single connection to the transmitter or the receiver powers the system when the devices are within 270ft (90m) of each other. Ultra-Compact Pico TOOLS™ – 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter.